Display problem

For discussion the Generic Collectible Card Game engine designed and run by Tommi "wigy" Ronkainen

Moderators: Vastor Peredhil, Thorsten the Traveller, GCCG

Display problem

Postby Marric » Tue Jan 06, 2009 1:47 pm

Hi!

It may seem a silly problem, but i have it nevertheless...

I got a new display with FullHD resolution and changed to metw.bat file to "--geometry 1920x1080" to get the maximum benefit. But i found out that all cards look a little bit stretched and also the letters are a little bit to big to fit in the bottom line. The last thing is that the MP-area in the upper left corner is also a bit deranged (i think also letters too big are here the problem).

Can anyone help me out with this?

Yours,

Markus
Marric
 
Posts: 36
Joined: Fri Feb 02, 2007 9:54 pm
Location: Alfter, Germany

Postby Ringbearer » Tue Jan 06, 2009 2:09 pm

what helps is instead of the geometry you can replace that by --full
"I used to roll the dice, feel the fear in my enemies eyes."
- Coldplay, Viva la Vida.

Gaming is life, the rest is just dice rolls.
- John Kovalic, Dork Tower
User avatar
Ringbearer
 
Posts: 471
Joined: Thu Feb 01, 2007 3:39 pm

Postby Beornd » Tue Jan 06, 2009 7:04 pm

higher resolution as basic is not supported - only stretched. the next version of gccg will do that und i hope it will come soon. :D
User avatar
Beornd
 
Posts: 164
Joined: Fri Feb 09, 2007 5:15 pm

Postby wlk » Sun Jan 18, 2009 12:44 pm

Upscaling using geometry won't give you decent results with such higher resolutions.

I am also using a 1900x1200 screen, and had the same requirement.
Few monthes ago, I added some option to the gccg engine to enable "oversized" design.

For example, I am using --design 1500x1050 right now.

BUT, take care that the extra claimed area is visible by you only, meaning that other (classic) players won't be able to see cards you move outside of the play table (the grey area).

The good thing is that the chat log is then outside of the table, and you can move your hand bellow the table. Also i am using the persistent zoom at the free extra right area.

Theorically, you could play on the whole area if the other players use the same resolution, but many players are still using laptop with max resolution of 1024x768, so for now we cannot increase the default design size.

Image
wlk
 
Posts: 23
Joined: Sat Oct 11, 2008 10:20 pm

Postby Marric » Sun Jan 18, 2009 3:38 pm

First of all: thanks for your replies!

I tried using "--design 1500x1050", which works just like "--geometry 1500x1050" (at least I see the same result...) and after adding the "--full" option, i get the following error message:

I/O exception at Driver::Driver(bool): No suitable video mode found, needs 16bpp.


Is there anything i missed? Is there any list of the options which can be used in the ccg_client.exe...`?

Yours, Markus
Marric
 
Posts: 36
Joined: Fri Feb 02, 2007 9:54 pm
Location: Alfter, Germany

Postby Bruce » Sun Jan 18, 2009 6:17 pm

Now the whole world knows of my latest dumb mistake by deckbuilding. :cry: :oops:
wlk, why don't you ask us "say cheese" the next time you take a screenshot? I'll try to type some message full of philosophical content showing all the great profundity of my soul :lol:
User avatar
Bruce
 
Posts: 151
Joined: Fri Dec 28, 2007 3:43 pm
Location: Kevelaer, Germany

Postby wlk » Sun Jan 18, 2009 7:13 pm

Bruce wrote:Now the whole world knows of my latest dumb mistake by deckbuilding. :cry: :oops:
wlk, why don't you ask us "say cheese" the next time you take a screenshot? I'll try to type some message full of philosophical content showing all the great profundity of my soul :lol:


:D :D sorry dude, you were the only table in play when I joined.
wlk
 
Posts: 23
Joined: Sat Oct 11, 2008 10:20 pm

Postby wlk » Sun Jan 18, 2009 7:15 pm

Marric wrote:First of all: thanks for your replies!

I tried using "--design 1500x1050", which works just like "--geometry 1500x1050" (at least I see the same result...) and after adding the "--full" option, i get the following error message:

I/O exception at Driver::Driver(bool): No suitable video mode found, needs 16bpp.


Is there anything i missed? Is there any list of the options which can be used in the ccg_client.exe...`?

Yours, Markus


Try that one:
start %CLIENT% --design 1450x1050 --user %USER% metw.xml

Also please post your .\module_windows32\stdout.txt file (contains the program logs).
wlk
 
Posts: 23
Joined: Sat Oct 11, 2008 10:20 pm

Postby Marric » Sun Jan 18, 2009 7:33 pm

Ok, i did enter the "--design 1400x1050" option, which only gave the windowed version (i would like to have the fullscreen display)...

And here's the content of the stdout.txt file:

GCCG v0.9.2-beta Generic CCG Client (x86 Win32 build by Wlk Jan 11 2009)
(c) 2001-2009 Tommi Ronkainen
Security manager: allow read file: ./decks/*
Security manager: allow read file: ./graphics/*
Security manager: allow read file: ./sounds/*
Security manager: allow execute: ./scripts/*
Security manager: allow read file: ./scripts/*
Security manager: allow read file: E:\GCCG/.gccg/*
Security manager: allow execute: E:\GCCG/.gccg/init
Security manager: allow write file: ./vardump
Security manager: allow open dir: ./scripts
Loading ./xml/metw.xml
Security manager: allow open dir: ./scripts/Metw
Security manager: allow open dir: ./decks/Metw
Security manager: allow open dir: ./decks/Metw/*
Security manager: allow open dir: E:\GCCG/.gccg/Metw/import
Security manager: allow open dir: E:\GCCG/.gccg/Metw/import/*
Security manager: allow open dir: E:\GCCG/.gccg/Metw/export
Security manager: allow open dir: E:\GCCG/.gccg/Metw/export/*
Security manager: allow write file: E:\GCCG/.gccg/Metw/*
Security manager: allow connect: */0
Loading ./xml/Metw/metw_basecards.xml
Loading ./xml/Metw/wizards.xml
Loading ./xml/Metw/dragons.xml
Loading ./xml/Metw/dark_minions.xml
Loading ./xml/Metw/lidless_eye.xml
Loading ./xml/Metw/against_shadow.xml
Loading ./xml/Metw/white_hand.xml
Loading ./xml/Metw/balrog.xml
Loading ./xml/Metw/promo.xml
Loading ./xml/Metw/promo_de.xml
Loading ./xml/Metw/vc1.xml
Loading ./xml/Metw/firstborn.xml
Loading ./scripts/client.triggers
Calling "init" ""
Initializing graphics driver: resolution 1450x1050
Graphics initialized:
Driver = windib
Fullscreen = No
Physical resolution = 1450x1050
HW Available = No
HW Video memory = 0MB
HW Surface = No
BPP = 32
Calling "init" "client"
Calling "init" "game"
Calling "exit" ""
Marric
 
Posts: 36
Joined: Fri Feb 02, 2007 9:54 pm
Location: Alfter, Germany

Postby wlk » Sun Jan 18, 2009 8:08 pm

Indeed, there is a limitation (likely a driver limit) when combining fullscreen with resolution greater than 1280x1024.

You can still use --design 1280x1024 --full but otherwise you must use windowed mode.

I might have a look at the driver code to check if it can be passed through.

I'd still recommend using --design 1900x1200 if you want a pseudo fullscreen, but you will have a lot a wasted space...
wlk
 
Posts: 23
Joined: Sat Oct 11, 2008 10:20 pm

Postby Alter Tuk » Sun Jan 18, 2009 11:42 pm

Bruce wrote:Now the whole world knows of my latest dumb mistake by deckbuilding. :cry: :oops:
wlk, why don't you ask us "say cheese" the next time you take a screenshot? I'll try to type some message full of philosophical content showing all the great profundity of my soul :lol:

edit (of the chat): I liked your deck as well. Keep it going! :lol:
User avatar
Alter Tuk
 
Posts: 453
Joined: Sun Aug 27, 2006 6:20 pm
Location: Germany

Re: Display problem

Postby Mordakai » Thu May 26, 2016 9:47 pm

Ok, here is a question for all of you, GCCG players:

Am I the only one that feels that the default (1024x768) screen resolution for the game is too small? I understand that when the game started, the screens were not too big, but nowadays I think there is room for everyone to increase that size.

Looking at laptops (usually with smaller screens), I think 1366x768 is a resolution that everyone can reach. That would allow us to play in, let's say, 1300x700, keeping a window which almost fits the entire screen, and also giving us a lot more room to play our cards. Here is a screenshot with 1300x700 client:

Image

Of course, this would need that everyone update his/her client to avoid missing part of the table, but I think it's an effort worth to take. What do you say?
C'mon, not the Elves of Lindon AGAIN...
User avatar
Mordakai
 
Posts: 199
Joined: Fri Mar 01, 2013 10:38 am

Re: Display problem

Postby Bandobras Took » Fri May 27, 2016 3:04 am

But . . . the tradition! Next thing you know, the CoE will issue more errata! :)
Remember, NetRep rulings are official. This does not necessarily mean they are correct.

You probably aren't playing Fallen Wizards correctly.
User avatar
Bandobras Took
Non-voting member
 
Posts: 2309
Joined: Wed Jan 31, 2007 2:30 pm

Re: Display problem

Postby Vastor Peredhil » Fri May 27, 2016 6:16 am

I am all for it, also we issue, if People bring up cases. We are just Not rewriting the entire game
Vastor Peredhil
Council Member
 
Posts: 861
Joined: Wed Jan 31, 2007 10:46 am
Location: Kempen (Niederrhein) Germany

Re: Display problem

Postby wlk » Fri May 27, 2016 9:53 am

Mordakai wrote:Ok, here is a question for all of you, GCCG players:

Am I the only one that feels that the default (1024x768) screen resolution for the game is too small? I understand that when the game started, the screens were not too big, but nowadays I think there is room for everyone to increase that size.

Looking at laptops (usually with smaller screens), I think 1366x768 is a resolution that everyone can reach. That would allow us to play in, let's say, 1300x700, keeping a window which almost fits the entire screen, and also giving us a lot more room to play our cards. Here is a screenshot with 1300x700 client:

Of course, this would need that everyone update his/her client to avoid missing part of the table, but I think it's an effort worth to take. What do you say?


Some people still uses small resolutions, and you have to adjust to the lowest common denominator, since they might just peek at your game (even if you and your mate are using full HD res).
I tried in the past to increase the default resolution, but this raised many complains.
That was in the previous decade though :)
Also keep in mind that gccg is (was?) not limited to METW.
wlk
 
Posts: 23
Joined: Sat Oct 11, 2008 10:20 pm

Next

Return to GCCG

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron